Request a quote
PE-PS2000 · 48 VdcProject build
Continuous output2000W
Surge, 3 s4000W
Transfer, UPS mode<20ms
ChargingAC + solarrate set by input spec
Weight, dimensions and capacity follow the pack you specify — confirmed on the build sheet
Portable UPS · Bidirectional

PE-PS2000 Bidirectional Power Station

SKU PE-PS2000 · 48 Vdc architecture · 100–240 Vac input

A 2000 W pure sine inverter and a high-rate AC charger in one enclosure. It switches to battery in under 20 ms, so a router, NVR or workstation never notices the grid drop.

Rated output
2000 W
Transfer time
<20 ms
Warranty
24 months
Power factor
>0.9

MOQ from 20 units · Sample in about a week · Typically 3–4 weeks after deposit · CE / RoHS / UN38.3

MOQ
From 20 unitscustom builds quoted per spec
Lead time
3–4 weekstypical, after deposit
Sample
~1 weekexpress, door to door
Incoterms
On requestFOB or DDP, terms per project
What it runs

Runtime on the loads you actually have.

Measured on the standard build at 25 °C. Your figures will move with ambient temperature and battery age — send the load list and we confirm against the configuration you order.

Typical runtime Standard build

Office load ~200 W30+ hours
Power tools ~500 W12 hours
Microwave, kettle ~1000 W6 hours
Heater, full load ~2000 W3 hours
Surge load 4000 W, 3 sHandled by design

Runtime is quoted at 25 °C on a new pack. Above 40 °C the pack derates and the inverter loses efficiency, so a tropical site needs a larger platform for the same hours. Tell us the load and the climate and we size from there.

Platform Fixed for this model

Continuous output2000 W
Surge, 3 s4000 W
WaveformPure sineTHD <3%
Transfer, UPS mode<20 ms
DC architecture48 Vdc, bidirectional
ChargingAC + solarrate set by your input spec
Cycle life2000+ cyclesto 80% capacity
ProtectionFull BMS + hardware cutoffover/under voltage, over-current, over-temp, short circuit
Operating range0–40 °Cderated above 40
CertificationCE · RoHS · UN38.3MSDS with every shipment
Warranty24 months

Fits

  • Routers, ONU and small switches on 12–48 Vdc rails
  • NVR or workstation loads that need a second or two of ride-through, not an hour
  • Field and project sites with no stable mains

Not for

  • Sustained loads above the rated output — check the surge figure first
  • Whole-building backup, where an AC online UPS is the correct product
  • Permanent outdoor installs without a shelter, unless the enclosure is specified up front

Capacity, dimensions and shipping data These follow the cell configuration you order, so they are confirmed in the build sheet rather than guessed on a page. Send the runtime you need to cover and you get the exact build — weight, carton size, container loading — usually within one working day.

Request the build sheet
100%of units aged at rated load — not a batch sample
4 hon the bench before packing, every single unit
1test record per serial, sent with the batch on request
Before it ships

Every unit is aged at rated load. Not a sample.

Each unit runs on the aging bench at 100% load before it is packed. Capacity, transfer time and thermal rise are logged against its serial number, and that record travels with the shipment — so when something fails in the field you have a baseline instead of a guess.

  • Capacity and transfer time logged per unit
  • Thermal rise recorded at rated output
  • Batch photos and video on request, before packing
Same platform

Other units buyers pair with this one.

Full catalogue

Seven more models.

Same platform, different capacity and enclosure. Tell us the load and we will point you at the right one.

View all products
Get a quote

Tell us the runtime you need. We'll build to it.

Capacity is the variable. Send your load in watts and the hours you need to ride through, and you get a configuration, a weight and a landed cost.

  • Reply within 1 business day
  • Configuration with real weight and carton size
  • Sample available before MOQ

Ask about the PE-PS2000

Five fields. No account needed.

We reply from a named person, not a no-reply address.

WhatsApp us