Request a quote
Line 01 · Network & CCTV

An 18 W DC UPS for the things that reboot.

It sits in parallel with the 12 V adapter, so when the mains drops the device does not see the gap. No inverter stage, no transfer click, no truck roll for a two-second outage.

Sample from 1 unit · batch from 20 · CE / RoHS / UN38.3 with the goods

18 WOutput
8+ h12 V / 1 A router
≤10 msTransfer
3Variants
What it is not
Not an AC UPS Not 48 V PoE Not sized for a 4-camera NVR
Will it carry my device

What 18 W actually covers.

Most of the support tickets on this product come from one thing: it was sold for a load it cannot carry. Here is the honest split, before you order anything.

DeviceTypical loadFits?Which model
Router / ONU 12 V, 0.5–1 A Yes PE-DU18
Single IP camera 12 V, 0.5–1 A Yes PE-DU18
Mobile CCTV trailer 12 V DC Yes PE-DU18-C
Control cabinet panel 12–18 V DC Yes PE-DU18-C
PoE switch / PoE injector 48 V No Ask us for a 48 V option
NVR with 4 cameras 12 V, 3 A and up No AC UPS, another line
24 V PLC / industrial rail 24 V No Ask — 24 V input on request

* If your device is not on this list, send a photo of the adapter label. You get a yes or a no the same day — we would rather lose the order than ship a unit that browns out under load.

Two models

Same board, different address.

PE-DU18 is built for the desk and the wall box. PE-DU18-C takes a wider input window and mounts into a cabinet.

PE-DU18

Router · ONU · camera

For ISP installers and CCTV contractors. Goes between the adapter and the device, no re-wiring of the customer's setup.

Output18 W
Capacity20 Ah class
MountingWall / on-unit
  • Keeps a single router or camera alive through an outage
  • Charges and passes through at the same time
  • The volume SKU — most accounts start here

PE-DU18-C

Cabinet · mobile CCTV

For control-cabinet builders and trailer installations, where the supply is already DC and there is no socket to plug into.

Output18 W
Capacity15 Ah class
Input12–18 Vdc
  • Accepts a DC input window instead of a fixed 12 V rail
  • Built for DIN rails, enclosures and vehicle installs
  • Pair it with a solar feed where there is no mains at all

Full specification sheets, including the discharge curve and the connector list, go out with the sample. Ask for them if you need them before that.

Why DC and not a small AC UPS

One conversion stage fewer.

01

Nothing to invert

A mini AC UPS takes the battery voltage up to mains and back down again inside your device. Two conversions, both of them heat. A DC unit hands the device the voltage it already wanted.

02

The gap is not visible

These units sit in parallel with the adapter rather than switching to it. The device keeps running on the same rail — no reboot, no reconnect, no log entry.

03

It goes where a UPS cannot

Inside a wall box, on a DIN rail, in a trailer. There is no room for a shoebox UPS and nobody is going to service one at a remote site.

Order a sample

Send the adapter label. We'll confirm it fits.

One unit at unit price, express, no batch commitment. Run it against your own load for a week before you decide anything.

  • Yes or no on fit, same working day
  • Spec sheet and connector list with the quote
  • Landed cost with freight included

Ask about the PE-DU18

Five fields. No account needed.

We reply from a named person, not a no-reply address.

WhatsApp us